The kitchen is the hardest-working room in the house, and one of the most expensive to change once it's built. Plumbing, power, gas and the rangehood duct are all locked in at slab and frame stage. Get the kitchen layout wrong and you live with it, or pay a lot to fix it.
Most kitchen problems I see on new homes aren't about finishes. They're about layout: a fridge that blocks the walkway, a bin with nowhere to go, a dishwasher door that hits the oven.
Here's how I'd approach the kitchen layout on a new home, and what to check on the plans before you sign.
C20 - What You Should Know When You Design Your New Home
$59.00 AUD
Last updated 28 Oct 2026 · Revision 3 · Free updates for life
Checklist Type: Minor
Form Factor: Fillable, print-ready PDF (A4, 42 pages)
When to use: Design stage: before the plans and specification are finalised and before you sign
A 134-check guide to work through with your designer while the plans are drawn. Settle the block, the sun, the layout, the energy rating, the services and the contract early, so a change costs a redraw, not a variation.
The common kitchen layout types
Most new homes use one of these:
- Galley. Two parallel benches. Efficient for one cook, but tight if the walkway is narrow or it's a through-route.
- L-shape. Benches on two walls. Works well in open-plan living and leaves room for a table or island.
- U-shape. Benches on three walls. Lots of bench and storage, but corners can be awkward and it can feel closed in.
- L or U with an island. The standard in most new Queensland project homes. Great for socialising and extra prep space, if there's room around it.
- Single wall. Common in smaller homes and apartments. Usually paired with an island to make it work.
There's no best kitchen layout. The right one depends on the room size, how many people cook at once, and how the kitchen connects to living areas and the yard.
Think in work zones
A good kitchen layout is really a set of zones. The old "work triangle" between sink, cooktop and fridge is still a useful check, but I find it more practical to break the room down like this:
- Storage zone. Fridge and pantry, close to where groceries come in.
- Prep zone. The biggest clear stretch of bench, ideally between the sink and the cooktop.
- Cooking zone. Cooktop and oven, with bench space on both sides for pots and plates.
- Cleaning zone. Sink, dishwasher and bins together, near where plates are cleared.
- Serving zone. Near the dining table or outdoor area.
Walk through making dinner on the plan. Groceries in, prep, cook, serve, clean up. If you keep crossing the room or walking around the island, the kitchen layout needs work.
Getting the island right in your kitchen layout
An island is the centrepiece of most new kitchens, and it's where layout mistakes show up.
- Walkway width. My rule: enough room for two people to pass, and for the dishwasher and oven doors to open fully with someone standing in front. Measure on the plan, don't guess.
- What goes in it. A sink in the island needs plumbing and a waste set in the slab. A cooktop in the island needs a ceiling or downdraft rangehood and makes the island a hazard zone for kids on stools.
- Seating. Stools need overhang for knees and space behind for chairs to slide out.
- Power. Island power points need conduit placed before the slab is poured.
If the island doesn't fit with comfortable walkways, a smaller island or a peninsula is better than a cramped big one.
Storage that actually works
Storage is the part of a kitchen layout people underestimate.
- Drawers over doors for base cabinets. You can see and reach everything.
- Corners. Blind corners waste space. Ask what corner solution is included.
- Pantry. Walk-in, butler's or cupboard. A butler's pantry needs its own bench, power and lighting, and sometimes a sink.
- Bins. A pull-out bin unit near the sink, with room for recycling.
- Overhead cupboards. Decide whether they go to the ceiling or stop short with a bulkhead. Higher ceilings change this.
- Appliance garage. A spot for the kettle, toaster and coffee machine with power, so they're not cluttering the main bench.
Appliances and clearances
Measure your appliances before the cabinet design is final, not after.
- Fridge space. Check width, height and depth for the fridge you'll actually buy, plus ventilation gaps the manufacturer asks for. Plumbed water needs a tap behind it.
- Oven position. A wall oven at chest height is easier on your back than an under-bench one.
- Dishwasher next to the sink, and not in a corner where the open door blocks a drawer.
- Cooktop clearances. Gas and electric cooktops have required clearances to rangehoods and nearby surfaces. My article on gas cooktop clearance heights explains the gas rules.
- Microwave. Built-in or on the bench? It needs a power point either way.
Services to lock in early
This is where the kitchen layout meets the build program. Once the slab is poured and the plasterboard is up, moving things gets expensive.
- Plumbing. Sink, dishwasher, fridge water and any island sink. Under-slab plumbing is set before the pour.
- Power points. Count them: benchtop doubles, appliances, the island, the pantry and the appliance garage.
- Rangehood. It should be ducted outside, not into the roof space. Check the duct route on the plans.
- Gas or induction. Decide early. Gas needs a supply line. Induction needs the right circuit at the switchboard.
- Lighting. Task lighting over the prep zone and under overhead cupboards, not just downlights behind your head.
- Window and splashback. A window behind the sink or cooktop changes what splashback and rangehood will work.
Our C10 Rough In checklist covers checking these services before plasterboard hides them, and it's on the Checklists page.
What to check on the plans
Before you sign, ask for the kitchen to be drawn properly: a plan view and elevations of each wall, showing cabinet heights, appliances and power points.
- Dimensions for every bench, walkway and appliance space.
- Door swings for the oven, dishwasher, fridge and pantry, all drawn open.
- Bench heights to suit the tallest regular cook.
- Elevations showing where overhead cupboards, the rangehood and the window sit.
- Specification for cabinetry material, handles, drawer runners and benchtop.
Our C20 Design Your New Home checklist walks you through reviewing the whole plan, including the kitchen layout. If you're thinking about floors too, my kitchen flooring guide covers the options.
The short version
Choose a kitchen layout that suits your room and the way you cook, then check it zone by zone: storage, prep, cooking, cleaning and serving. Give the island enough space around it, measure for your real appliances, and lock in plumbing, power and the rangehood duct before the slab and plasterboard go in.
Walk through cooking dinner on the plan. If it feels awkward on paper, it'll feel worse in real life.
FAQs
What's the best kitchen layout for a new home?
There isn't one best layout. An L-shape or U-shape with an island suits most open-plan family homes, as long as the room is big enough for comfortable walkways.
Should I put the sink or cooktop in the island?
A sink in the island is common and keeps the cooktop against a wall with a ducted rangehood. A cooktop in the island needs a ceiling or downdraft rangehood and more care around seating.
When do I need to finalise the kitchen layout?
Before you sign the contract, and definitely before the slab is poured. Plumbing and island power go in under the slab.
Does a butler's pantry need its own sink?
Not necessarily, but it does need bench space, power points and lighting. A sink adds plumbing cost, so decide early.


